ddHifi TC28CPro USB-C to USB-C OTG and Power Adapter
Sản Phẩm
- Tất cả sản phẩm
- Nổi bật
- Tai nghe
- DAC/AMP
- Loa
- Nguồn phát
- Home Studio
- Phụ kiện
Xem thêm hình ảnh
Schiit Lyr+ là bộ khuếch đại đầu nhỏ gọn sử dụng công nghệ Fusion Architecture™ độc quyền của Schiit Audio với công suất ấn tượng.
19.990.000 ₫
Phiên bản kèm bóng 6SN7
Vận chuyển
Miễn phí vận chuyển và trả hàng
Bảo hành
1 năm
Chi nhánh còn hàng
(028) 38 202 909 – 0914 345 357
(028) 38 202 909 – 0914 345 357
Schiit Lyr+ switches seamlessly to its internal solid state gain stage, based on exotic depletion-mode MOSFETs. Want tube gain? Then plug in any 6SN7-type tube, and Lyr+ switches over to 100% tube voltage gain with the MOSFETs completely out of the picture. That’s the magic of Fusion Architecture.
Schiit Lyr+ is our first compact headamp that gives you relay ladder volume control, for ultimate transparency and perfect channel matching, from the lowest to highest volumes. Coupled with a powerful Continuity™ bipolar output stage, full DC coupling throughout, separate regulated high-voltage and low-voltage supplies, the convenience of remote control (in case you want to use it, say, off the desktop), and microprocessor oversight, Lyr+ is a small marvel.
Lyr+ delivers up to 6W RMS per channel through the standard ¼” headphone jack, so there’s no need for balanced headphones to take advantage of all that power. But, at the same time, advanced oversight ensures Lyr+ is safe for every headphone. DC, overcurrent, and tube sensing means this is a fully modern tube amp.
Thông số chi tiết
Gain
High 5.7 (15dB), Low 1.2 (1.35dB)
Model
Schiit Lyr+
Size
9 x 6 x 2”
Weight
6 lbs
Topology
Coherence ™ fully discrete, current-mode noninverting 6SN7/bipolar hybrid with constant transconductance output stage with Fusion Architecture™ depletion MOSFET gain fallback, 64-step relay ladder volume control
Protection
Microprocessor oversight for high DC, over-current, and tube presence; mute on any fault and management of tube and solid state gain modes
Power Supply
two internal power transformers with 72VA total rating, plus with over 55,000uf of filter capacitance; two discrete regulated +/-100V supplies, two high-current +/-26V supplies, four regulated oversight supplies—20V, +/-15V, 5V
Power Consumption
30W
Tube Mode, Low Gain
THD: > 0.003%, 20Hz-20KHz, at 2V RMS, 32 ohms IMD: > 0.003%, CCIR at 2V RMS SNR: -70dB, 20Hz-20KHz, 32 ohms Output Impedance: 0.4 ohms
Tube Mode, High Gain
THD: >0.0003%, 20Hz-20KHz, at 2V RMS IMD: > 0.0003%, CCIR at 2V RMS SNR: -95dB, 20Hz-20KHz Output Impedance: 75 ohms
Solid State Mode, Low Gain
THD: >0.0015%, 20Hz-20KHz, at 2V RMS, 32 ohms IMD: > 0.001%, CCIR at 2V RMS, 32 ohms SNR: -72dB, 20Hz-20KHz, 32 ohms Output Impedance: 0.4 ohms
Solid State Mode, High Gain
THD: >0.003%, 20Hz-20KHz, at 2V RMS, 300 ohms IMD: > 0.003%, CCIR at 2V RMS, 32 ohms SNR: -85dB, 20Hz-20KHz, 32 ohms Output Impedance: 0.6 ohms
All Tube and Solid State Modes
Frequency Response: 20Hz - 20Khz, +/-0.08dB Maximum Power, 16 ohms: 9.0W RMS per channel Maximum Power, 32 ohms: 6.0W RMS per channel Maximum Power, 50 ohms: 4.0W RMS per channel Maximum Power, 300 ohms: 900mW RMS per channel Maximum Power, 600 ohms: 450mW RMS per channel
Preamp Output, Low Gain, Solid State
THD: >0.0003%, 20Hz-20KHz, at 2V RMS IMD: > 0.0025%, CCIR at 2V RMS SNR: -90dB, 20Hz-20KHz Output Impedance: 75 ohms
